Hot-Selling Small Rock Limestone Coal Coal Gangue Iron Ore Stone Hammer Crusher

• Type: Ring Hammer Crusher, Ring Hammer Crusher
• Motor Type: AC Motor, AC Motor
• Motor Power: 37kw, 37kw
• Application: Chemistry, Chemistry
• Materials: Limestone, Limestone
• Outlet Size: 150-300mm, 150-300mm
• Model NO.: BF-PSJ01
• Inlet Size: 300×1300mm, 300×1300mm
• Condition: New, New
• Warranty: 2 Year, 2 Year
• After-sales Service: Video Support
• After-Sales Service: Video Support
• Transport Package: Wooden Packing
• Specification: 1180*885*1690mm
• Trademark: BF
• Origin: Henan, China
• Production Capacity: 10000

Product Description

Hot-Selling Small Rock Limestone Coal Coal Gangue Iron Ore Stone Hammer Crusher

Product Description

Equipment introduction:The evaluation type crusher is also called hammer crusher, stone crusher and stone crusher. This series of hammer crusher is suitable for crushing minerals of various brittle materials. The structure is simple, the crushing ratio is large, and the efficiency is high. It can be used for dry and wet crushing. It is widely used in fine grinding of medium-hardness materials in industrial sectors such as mineral processing plants, refractory plants, cement plants, and glass plants. For example: limestone, dolomite, bluestone, coal, coke, coal crushed stone, square brick and other stones, for small particle size soft iron ore wear-resistant materials, etc., a heavy hammer crusher can also be used.

Product Parameters

Product name	Hammer Crusher
Article number	BF-SSJ01
Power	110kw
Feed particle size	1000mm
Discharge particle size	3-15mm
Yield	45-70kg/h
Maximum feed size	1000mm
Weight	500kg

Working principle

The hammer crusher mainly drives the rotor to rotate at high speed in the crushing wall by clicking, and at the same time, the hammer head rotates to generate impact force, and the material is hit, impacted, sheared, and ground to achieve the crushing effect. The lower part of the rotor is equipped with The sieve plate and the crushed material smaller than the sieve hole size are immediately discharged through the sieve plate, and the coarse particles larger than the sieve hole size remain on the sieve plate and continue to be hit and ground by the hammer, and then are discharged out of the machine through the sieve plate.

Scope of application

The main purpose of hammer crusher:
Hammer crusher is used to crush all kinds of medium-hard and weak abrasive materials. The compressive strength of the material does not exceed 250MPa, and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone, etc. It is also used to crush the scrap wood, paper or crushed asbestos cement with strong fiber structure, elasticity and toughness to recover asbestos fiber and so on. In addition, hammer crusher can not only be used in crushing production line, sand making production line, but also can replace cone crusher in mineral processing production line. The main working part of the hammer crusher is the rotor with the hammer (also known as the hammer head). The rotor consists of a main shaft, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feeding port, and is crushed by the impact, impact, shearing and grinding of the high-speed hammer. In the lower part of the rotor, there is a sieve plate, and the particle size smaller than the sieve hole size in the crushed material is discharged through the sieve plate, and the coarse particle size larger than the sieve hole size is retained on the sieve plate and continues to be hit and ground by the hammer, and finally passes through the sieve plate. out of the machine.

Machine display

Hammer crusher is a one-stage crusher that directly crushes materials with a maximum particle size of 600-1800 mm to below 25 or 25 mm. Hammer crusher is suitable for crushing medium hardness materials, such as limestone, slag, coke, coal and other materials in the cement, chemical, electric power, metallurgy and other industrial sectors for medium and fine crushing operations. The single-stage hammer crusher is a heavy hammer crusher, also known as a compound hammer crusher. It is mainly used for limestone crushing operations. The large single-stage hammer crusher can directly crush limestone with a diameter of 1 meter to about 20mm. Strong crushing ability. Single-stage hammer crushers have numerous applications in the cement industry.

Packaging & Shipping