| Customization: | Available |
|---|---|
| Type: | Ring Hammer Crusher, Ring Hammer Crusher |
| Motor Type: | AC Motor, AC Motor |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product name | Stone crusher |
| Model | BF-200 |
| Maximum feeding side length | 200mm |
| Discharge particle size | 1-25mm |
| Motor Power | 5.5kw |
| Production capacity | 2000-5000kg/h |
| Weight | 600kg |
The hammer crusher mainly drives the rotor to rotate at high speed in the crushing wall by clicking, and at the same time, the hammer head rotates to generate impact force, and the material is hit, impacted, sheared, and ground to achieve the crushing effect. The lower part of the rotor is equipped with The sieve plate and the crushed material smaller than the sieve hole size are immediately discharged through the sieve plate, and the coarse particles larger than the sieve hole size remain on the sieve plate and continue to be hit and ground by the hammer, and then are discharged out of the machine through the sieve plate.
The main purpose of hammer crusher:
Hammer crusher is used to crush all kinds of medium-hard and weak abrasive materials. The compressive strength of the material does not exceed 250MPa, and the moisture content is less than 15%. The crushed materials are coal, salt, chalk, gypsum, brick, limestone, etc. It is also used to crush the scrap wood, paper or crushed asbestos cement with strong fiber structure, elasticity and toughness to recover asbestos fiber and so on. In addition, hammer crusher can not only be used in crushing production line, sand making production line, but also can replace cone crusher in mineral processing production line. The main working part of the hammer crusher is the rotor with the hammer (also known as the hammer head). The rotor consists of a main shaft, a disc, a pin and a hammer. The motor drives the rotor to rotate at high speed in the crushing chamber. The material is fed into the machine from the upper feeding port, and is crushed by the impact, impact, shearing and grinding of the high-speed hammer. In the lower part of the rotor, there is a sieve plate, and the particle size smaller than the sieve hole size in the crushed material is discharged through the sieve plate, and the coarse particle size larger than the sieve hole size is retained on the sieve plate and continues to be hit and ground by the hammer, and finally passes through the sieve plate. out of the machine.
){kind=link}