| Customization: | Available |
|---|---|
| After-sales Service: | Video Support |
| Warranty: | 1 Year |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product introduction: Compared with other arc zinc spraying machines, this arc zinc spraying machine mainly has the following characteristics:
1. Vertical frame structure, reasonable inlet and outlet air channels and component layout;
2. The control system adopts high-quality electrical components for more reliable operation, and the manufacturing process of the zinc spraying machine power supply is more reasonable;
3. The system has overload and short circuit protection;
4. The diameter of the rear wheel of the power supply for a general arc zinc spraying machine is 200mm, while the diameter of the rear wheel of this power supply is 250mm, making it easy to climb over obstacles on the construction site;
5. In addition to a wire feeding voltmeter, a wire feeding ammeter has also been added. The wire feeding voltmeter can preset the spraying current, and during the spraying process, the mechanical and electrical status of the zinc spray gun can be detected through the wire feeding ammeter to ensure its good condition;
6. The output of the DC high current part is concealed, and the fixing screws can be M8-M12mm. The cable joint is a compression type contact, which avoids the insulation board being burned by the heat of the output pile head, and will not damage the output pile head due to the heat of the cable joint.
7. Suitable for pull type arc spray guns;
8. This power supply integrates the control of spray gun working conditions, wire feeding speed regulation, and gas pipeline, making it an ideal specialized equipment for arc copper spraying;
9. The control and operation are particularly simple, as long as the small switch at the bottom of the spray gun is turned, remote control can be achieved.
Scope of application: The arc zinc spraying machine is mainly used for spraying zinc and aluminum on the surface of steel structures, bridges, wind power generation, railways, water gates, petrochemical storage tanks, transportation facilities, etc. to prevent corrosion.
Spraying materials: zinc wire, aluminum wire, tin wire, zinc aluminum alloy wire
|
Model |
BF-SX-300 |
|
Voltage |
AC 380V 50Hz 3phase |
|
Power |
15.8KVA |
|
Input current |
AC 22A |
|
OCV |
DC 20-45 V |
|
Voltage adjust class |
thick,fine each 3 class total 9class |
|
Voltage characteristic |
Flat characteristic |
|
Output current |
DC 300A |
|
Load rate |
60% (300A) |
|
Insulation grade |
E |
|
Dimension (mm) |
700×500×1010 |
|
Gross Weight |
176kg |
|
Pressure |
>=0.6 MPa |
){kind=link}